Owner manual

12 RDD-Series Rotary Direct Drive Bearingless Motor Installation Instructions

Publication RDB-IN001A-EN-P — October 2009

Mount the Motor

Follow the diagram and steps below to install a motor on the machine.

IMPORTANT

The preferred motor-mounting orientation is with the feedback and power connectors on

the bottom of the motor. The preferred orientation improves environmental protection.

Alternate alignment ports are shown in the Product Dimensions

drawing.

Step Description

1 Center motor on shaft.

2 Position motor on machine shaft and mate pilot in the machine recess.

3 Using an alternating pattern, insert and tighten fasteners.