User Manual Owner's manual

Publication 1757-UM006A-EN-P - May 2002
2-34 Integrating Fieldbus into Rockwell Automation Logix System
BLOCK BLOCK_ERR: 5 (Dev Fault State Set) FFFLSAFE
BLOCK BLOCK_ERR: 6 (Dev Needs Maintenance Soon) FFDEVNMS
BLOCK BLOCK_ERR: 7 (I/P Failure or PV BAD Status) FFINFL
BLOCK BLOCK_ERR: 8 (O/P Failure) FFOUTFL
BLOCK BLOCK_ERR: 9 (Memory Failure) FFMEMFL
BLOCK BLOCK_ERR: 10 (Lost Static Data) FFLSTDTA
BLOCK BLOCK_ERR: 11 (Lost NV Data) FFLNVDTA
BLOCK BLOCK_ERR: 12 (Readback Check Failed) FFRBCKFL
BLOCK BLOCK_ERR: 13 (Dev Needs Maintenance Soon) FFDEVNMS
BLOCK BLOCK_ERR: 14 (Power Up) FFPWRUP
BLOCK BLOCK_ERR: 15 (Out-Of-Service) FFOOS
BLOCK XD_ERROR: 16 (Unspecified Error) TBUNSPEC
BLOCK XD_ERROR: 17 (General Error) TBGENRAL
BLOCK XD_ERROR: 18 (Calibration Error) TBCALERR
BLOCK XD_ERROR: 19 (Configuration Error) TBCFGERR
BLOCK XD_ERROR: 20 (Electronics Failure) TBELECFL
BLOCK XD_ERROR: 21 (Mechanical Failure) TBMECHFL
BLOCK XD_ERROR: 22 (I/O Failure) TBIOFL
BLOCK XD_ERROR: 23 (Data Integrity Error) TBDTAERR
BLOCK XD_ERROR: 24 (Software Error) TBSWERR
BLOCK XD_ERROR: 25 (Algorithm Error) TBALGERR
UPDATE TB Static Data Update Event TBSTCHNG
UPDATE FB Static Data Update Event FBSTCHNG
WRITE Write Protect Change Alarm RBWPCHNG
UPDATE Link Object Update Event FBLOCHNG
UPDATE Trend Object Update Event No Action
ATTENTION
!
When using the 1788-CN2FF, no alarms come from
Fieldbus devices when used with ProcessLogix. Data
with status will be produced.
Table 2.K Fieldbus alarm enumerations and alarm/event type identification
Enumeration Description Alarm/Event Type