User Manual Owner's manual

Publication 1757-UM006A-EN-P - May 2002
Standard Function Block Parameters A-43
Table A.115 SP_D
Table A.116 SP_HI_LIM
Valid Views
VIEW_1, VIEW_3
Storage
Non-Volatile
Remarks
Normally, the operator has permission to write this value, but PROGRAM or
LOCAL remove the permission and grant it to a supervisory computer or a local
control panel.
The data type consists of the value and status of floating point parameters
that are Inputs or Outputs. It uses the following two elements.
• Status
• Value
Classification
Record
Description
Defines the setpoint of any discrete block.
FF Data Type
DS-66
Range
PV_STATE
Usage
C/Setpoint
Length
2
Valid Views
VIEW_1, VIEW_3
Storage
Non-Volatile
Remarks
Normally, the operator has permission to write this value, but PROGRAM or
LOCAL remove the permission and grant it to a supervisory computer or a local
control panel.
The data type consists of the value and status of discrete value parameters. It
uses the following two elements.
• Status
• Value
Classification
Simple Variable
Description
Defines the high limit for setpoint entry.
FF Data Type
Float
Range
PV_SCALE +/- 10 percent
Usage
C/Contained
Length
4
Valid Views
VIEW_2
Storage
Static
Remarks
Initial value is 100 percent