User manual

Publication 1760-UM001A-EN-P
Pico System Settings 6-5
Changing the Menu
Language
Catalog numbers 1760-L12xxx provide five menu languages and catalog number
1760-L18AWA provides ten. These can be set as required via the System menu.
Language selection is only possible if Pico is not password-protected.
1.
1.1.
1. Press Del and Alt to call up the System menu.
2.
2.2.
2. Select “GB D F E I.” as required to modify the menu language.
The language selection for the first entry “GB” is
displayed.
1.
1.1.
1. Use up or down arrows to select the new menu
language, e.g. Italian.
2.
2.2.
2. Confirm your entry with Ok. Pico now shows the
new menu language.
3.
3.3.
3. Press Esc to return to the status display.
Changing Parameters
Pico allows you to change function relay parameters such as timer and counter
setpoints without having to call up the circuit diagram. This is possible regardless
of whether Pico is running a program or is in Stop mode.
1.
1.1.
1. Press Ok to switch to the main menu.
2.
2.2.
2. Start the parameter display by selecting PARAMETER.
A complete parameter set is shown. In the example, these
are the parameters for a timing relay T1.
Language LCD display Abbreviaton
English ENGLISH GB
German DEUTSCH D
French FRANCAIS F
Spanish ESPANOL E
Italian ITALIANO I
Additional languages with Catalog Number 1760-L18AWA
Portuguese PORTUGUES –
Dutch NEDERLANDS –
Swedish SVENSKA –
Polish POLSKI –
Turkish TURKCE –
ENGLISH
GB D F E I
00.00
30.00
TRG
RES
S
T1
+