User manual

Publication 1760-UM001A-EN-P
6-4 Pico System Settings
Changing or Deleting a Password
1.
1.1.
1. Press Del and Alt to call up the System menu.
2.
2.2.
2. Open the password menu via the menu item “PASSWORD...”.
3.
3.3.
3. The “CHANGE PW” entry flashes.
Pico only shows this menu if a password is present.
1.
1.1.
1. Press Ok to enter password entry menu.
2.
2.2.
2. Use the left or right arrow to move to the 4-digit
entry field.
3.
3.3.
3. Modify the four password digits using the cursor
buttons.
4.
4.4.
4. Confirm with Ok.
5.
5.5.
5. Press Esc to exit the password display.
Deleting
Use the number combination 0000 to delete a
password.
If a password has not been entered already, Pico shows
four dashes.
Password Incorrect or Not Known
If you no longer know the exact password, you can try to re-enter the password
several times.
After the fourth entry attempt, Pico will ask whether you
wish to delete the circuit diagram and data.
Press
• Esc: Nothing is deleted. Pico is still password
protected.
• Ok: Circuit diagram, data and password are deleted.
Pico will return to the Status display.
Pressing Esc retains the circuit diagram and data. You can
then make another four attempts to enter the password.
CHANGE PW
ACTIVATE
ENTER PW
----
ENTER PW
1005
ENTER PW
----
ENTER PW
XXXX
DELETE ALL ?