User manual

Publication 1760-UM001A-EN-P
Pico System Settings 6-3
3.
3.3.
3. Select “ACTIVATE” and press Ok.
The password is now active. Pico automatically returns to the Status display.
You must unlock Pico using the password before you can edit a circuit diagram or
enter the System menu.
Unlocking Pico
Unlocking Pico deactivates the password. You can re-activate password protection
later via the password menu or by switching the power off and on again.
1.
1.1.
1. Press Ok to switch to the main menu.
The “PASSWORD...” entry flashes.
2.
2.2.
2. Press Ok to enter password entry menu.
If Pico shows “PROGRAM...” in the main menu
instead of “PASSWORD...”, this means that there is no
password protection active.
Pico displays the password entry field.
1.
1.1.
1. Enter the password using the cursor buttons.
2.
2.2.
2. Confirm with Ok.
If the password is correct, Pico switches automatically to
the Status display.
The “PROGRAM...” menu item is now accessible so that
you can edit your circuit diagram.
The System menu is also now accessible.
IMPORTANT
Make a note of the password before you activate it. If the
password entry is no longer known, Pico can still be
unlocked, however, the circuit diagram and other settings are
deleted.
PASSWORD ...
STOP
PARAMETER
SET CLOCK ..
ENTER PW
XXXX
PROGRAM ...
STOP
PARAMETER
SET CLOCK ..