User manual

Publication 1760-UM001A-EN-P
Saving and Loading Circuit Diagrams 5-5
Connecting Pico to the PC
1.
1.1.
1. Connect the PC cable to the serial PC interface.
2.
2.2.
2. Insert the Pico plug in the open interface.
3.
3.3.
3. Activate the status display on the Pico.
Pico cannot exchange data with the PC
while in any other display mode.
Use PicoSoft to transfer circuit diagrams from
your PC to Pico and vice versa. Switch Pico to
Run mode from the PC to test and monitor
the program.
If You Have Trouble
PicoSoft provides extensive help on how to use the software.
• Start PicoSoft and click on Help.
The on-line help provides all additional information about PicoSoft that you will
need.
If a problem occurs during transmission, Pico displays the
message “INVALID PROG”.
Check whether the circuit diagram contains a function
that Pico does not recognize:
• The “time switch” function relays only work with Pico
versions with a real-time clock.
• The “analog comparator” function relay is only used with 24V dc Pico
versions.
• Text displays, jump and “S” markers only work with 1760-L18AWA version.
ATTENTION
!
!!
!
ELECTRICAL SHOCK HAZARD
Only use the 1760-CBL-PM02 cable with the Pico units. Use of
another cable may place the user in danger of electrical shock.
Esc
Ok
1760-CBL-PM02
INVALID PROG