User manual

Publication 1760-UM001A-EN-P
5-4 Saving and Loading Circuit Diagrams
Loading a Circuit Diagram from the Memory Module
1.
1.1.
1. Select the “CARD-> DEVICE” menu option.
2.
2.2.
2. Press Ok if you want to delete the Pico program and
replace it with the memory module program.
3.
3.3.
3. Press Esc to cancel.
If a problem occurs during the operation, Pico displays
the message “INVALID PROG”.
This either means that the memory module is empty or
that the program in the memory module contains
functions that Pico does not recognize.
• The “time switch” function relays only work with Pico versions with a
real-time clock.
• The “analog comparator” function is only used with 24V dc versions of Pico.
• Text displays, jump and “S” markers only work with the 1760-L18AWA.
Deleting a Program from the Memory Module
1.
1.1.
1. Select the “DELETE CARD” menu option.
2.
2.2.
2. Press Ok to confirm the prompt and delete the card
content.
3.
3.3.
3. Press Esc to cancel.
PicoSoft
PicoSoft is a PC program for creating, testing and managing Pico programs. You
should only transfer data between the PC and Pico using the special PC interface
cable, which is available as an optional accessory 1760-CBL-PM02.
IMPORTANT
If the memory module is password-protected, the password will
also be transferred to the Pico memory and will be active
immediately
>
>
DEVICE - CARD
CARD - DEVICE
DELETE CARD
INVALID PROG
DELETE ?
NOTE
PicoSoft software (catalog number 1760-
PICOSOFT) is available
at no charge from www.ab.com/pico.