User manual

Publication 1760-UM001A-EN-P

5-2 Saving and Loading Circuit Diagrams

Memory Module

The following memory modules are available as Pico accessories.

Programs including all relevant data can be transferred from the 1760-MM1

memory module to the 1760-L18AWA. It is not possible to transfer a program

from the 1760-L18AWA to the 1760-MM1. The 1760-MM2 does not fit in any of

the 1760-L12xxx controllers.

Each memory module can hold one Pico program.

Information stored on the memory module is “non-volatile” (the information is

not lost when the power is turned off), and thus you can use the module to make a

backup copy of your program and/or to transfer it to another Pico device.

The following information is saved to the memory module:

• the program

• all parameter settings of the program

• all text displays

• system settings

–

––

– debounce (input delay)

–

––

– P-Buttons

–

––

– password

–

––

– retention on/off

Insert the memory module into the open interface slot.

Pico Controller Memory Module

1760-L12xxx 1760-MM1

1760-L18AWA 1760-MM2

IMPORTANT

You can insert and remove the memory module even if power to

Pico is on, without the risk of losing data.