User manual

1 Publication 1760-UM001A-EN-P
Chapter 5
Saving and Loading Circuit Diagrams
Interface to Memory
Module and
Programming Cable
The Pico controller has a covered interface. You can either use the Pico interface to
save programs to a memory module or use PicoSoft programming software and the
interface cable to transfer them to a PC.
A Pico controller without a display (1760-L12AWA-ND) can be loaded with a
program via PicoSoft or automatically from a memory module every time power is
applied.
Use a screwdriver to carefully remove the
interface cover.
To close the interface, push the cover back onto
the opening and snap it into place.
ATTENTION
!
!!
!
ELECTRICAL SHOCK HAZARD
The memory module and PC-cable socket are at the potential of
L2. There is a danger of electric shock if L2 is not grounded. Do
not make contact with electrical components under the socket
cover.