User manual

Publication 1760-UM001A-EN-P
4-24 Drawing a Circuit Diagram with Pico
Figure 4.7 Signal Diagram
:
The trigger coil enables the flashing on and off. The flashing period starts with
switch position “off”. The reset coil has priority over the trigger coil and always
resets the relay contact.
If the time is set to zero, the flash frequency changes with the cycle time. The cycle
time varies according to the length of the circuit diagram.
Typical application:
• Activating warning lamps
Counter Relays
Pico works with counter relays C1 to C8.
The counter relay adds or subtracts pulses and
switches if the actual value is greater than or equal to
the setpoint value. Values between 0000 and 9999 are
possible.
A counter relay can be controlled via the counting pulse CCx, counting direction
DCx and reset RCx relay functions.
ttt
Reset
TriggerTrigger
Output
On
OnOn
On
DC
R