User manual

Publication 1760-UM001A-EN-P

Drawing a Circuit Diagram with Pico 4-7

Pico leaves the Enter mode when you press the left or right arrow keys or Ok.

Deleting Contacts and Relay Coils

1.1.

1. Move the cursor using the arrow buttons to a contact or coil field.

2. Press Del.

The contact or the relay coil is deleted, together with any connections.

Changing Make Contacts into Break Contacts

Every relay contact in the circuit diagram can be defined as either a make or break

contact.

1.1.

1. Move the cursor over the contact and press Enter to change to the enter mode.

2. Press Alt. The make contact changes to a break contact.

3. Press Ok twice to confirm the change.

Change I1 to I2 in the

contact field

Change {Q1 to {Q8 in the coil

field

{Q1

{Q8

I2----------{Q4

ALT

2 X