User manual

Publication 1760-UM001A-EN-P
4-2 Drawing a Circuit Diagram with Pico
Button Operation
The cursor buttons in the Pico circuit diagram perform three functions. The
current mode is indicated by the appearance of the flashing cursor:
• Move
• Enter
• Connect
In Move mode, you can use the arrow keys to move the cursor
around the circuit diagram in order to select a branch, contact or
relay coil.
Use Ok to switch to Enter mode so that you can enter or change a
value at the current cursor position. If you press Esc in Enter mode,
Pico will undo the most recent changes.
Press Alt to switch to Connect mode for wiring contacts and relays.
Press Alt again to return to Move.
Press Esc to leave the circuit diagram and parameter display. Pico performs many of
these cursor movements automatically. For example, Pico switches the cursor to
Move mode if no further entries or connections are possible at the selected cursor
position.
Opening the Parameter Display
If you specify the contact of a relay type in Enter mode, Pico automatically switches
from the contact number to the parameter display when you press Ok.
Press the right arrow
to switch to the next contact or coil field without entering any
parameters.
I 1