User manual

Publication 1760-UM001A-EN-P
3-8 Commissioning
Deleting a Circuit Diagram
1. Switch Pico to Stop mode.
The RUN option is displayed. Pico must be in Stop mode in order to extend,
delete or modify the program.
2.
2.2.
2. Select “PROGRAM”. Press OK to switch from the main menu to the next
menu level.
3.
3.3.
3. Select “DELETE PROG”
Pico displays the prompt “DELETE?”.
4.
4.4.
4. Press Ok to delete the program or Esc to cancel.
5.
5.5.
5. Press Esc to return to the Main Menu.
Fast Circuit Diagram Entry
You can create a circuit diagram in several ways. The first option is to enter the
elements in the circuit diagram and then wire all the elements together. The other
option is to use the enhanced operator guidance and create the circuit diagram,
from the first contact through to the last coil.
If you use the first option, you have to select some of the elements in order to create
and connect your circuit diagram.
The second, faster option is what you learned in the example. In this case you
create the entire circuit connection from left to right.
PROGRAM
DELETE PROG