User manual

Publication 1760-UM001A-EN-P

Commissioning 3-3

Creating a Circuit

Diagram (Program)

The following small circuit diagram example takes you step-by-step through

programming your first Pico circuit diagram. This example demonstrates most of

the basic programming rules.

As with conventional wiring, you use contacts and relays in the Pico circuit

diagram. With Pico, however, you no longer have to connect components

individually. With the push of a few buttons, the Pico circuit diagram produces all

the wiring. All you have to do is then connect any switches, sensors, lamps or

contactors you wish to use.

In the following example, Pico carries out all the wiring and performs the tasks of

the circuit diagram shown above.

+24V dc 0V dc

CR1

+24V

com