User manual

Publication 1760-UM001A-EN-P
Installation 2-3
Using a Mounting Plate
To install unit using mounting screws:
1. Snap the mounting feet in place.
2. Drill holes at the mounting feet positions, shown below.
3. Mount the controller.
For mounting dimensions, see Dimensions on page A-8.
Wiring Terminals
Required Tools
Slot-head screwdriver (width: 3.5 mm, torque: 0.57 to 0.79 Nm [5 to 7 lb-in])
Wire Size
• Solid
AWG 22 to AWG 12
• Stranded
AWG 22 to AWG 12
1760-L12xxx
1760-L18AWA
Click