User manual

1 Publication 1760-UM001A-EN-P

Chapter

Installation

Pico is installed in the following order:

• Mounting

• Using surge suppressors

• Wiring the inputs

• Wiring the outputs

• Connecting the incoming power

Prevent Electrical

Shock

European Communities

(EC) Directive

Compliance

If this product has the CE mark it is approved for installation within the European

Union and EEA regions. It has been designed and tested to meet the following

directives.

EMC Directive

This product is tested to meet the Council Directive 89/336/EC Electromagnetic

Compatibility (EMC) by applying the following standards, in whole or in part,

documented in a technical construction file:

• EN 50081-1 EMC — Generic Emission Standard, Part 1 — Residential,

Commercial, and Light Industry

• EN 50082-2 EMC — Generic Immunity Standard, Part 2 — Industrial

Environment

This product is intended for use in an industrial environment.

Low Voltage Directive

This product is tested to meet Council Directive 73/23/EEC Low Voltage, by

applying the safety requirements of EN 50178 Electric Equipment for Power

Installations Equipment Requirements and Tests. For specific information required

ATTENTION

Follow these guidelines when you handle the controller:

• Remove power before working on any of the wiring to Pico.

• Touch a grounded object to discharge static potential.

• Wear an approved wrist-strap grounding device.

• If available, use a static-safe work station.