User manual

Publication 1760-UM001A-EN-P
6-8 Pico System Settings
Setting the Time
If the clock is not set yet or if Pico is powered on after the battery backup time has
been exceeded, the clock will start with the setting MO and the number of the
current operating system, in this case 01:40 for catalog numbers 1760-L12xxx and
02:30 for catalog number 1760-L18AWA.
The Pico clock has a one-week cycle so that weekdays and times have to be set.
1.
1.1.
1. Select SET CLOCK from the main menu.
This opens the menu for setting the time.
2.
2.2.
2. Select SET CLOCK.
3.
3.3.
3. Set the values for day and time.
• Left and right arrows move between the
parameters
• Up and down arrows change the value of a
parameter
4.
4.4.
4. Ok Save day and time or
Esc Retain previous setting.
5.
5.5.
5. Press Esc to leave the time setting display.
Changing Between
Winter/Summer Time
(Daylight Saving Time)
The clock can be toggled between winter and summer time (daylight savings time)
using the cursor buttons.
1.
1.1.
1. Select SET CLOCK from the main menu.
This opens the menu for setting the time.
2.
2.2.
2. Select menu item “WINTER TIME” or
“SUMMER TIME” as required.
NOTE
Pico uses military time, so 1:00 p.m. is 13:00, 7:30 p.m. is 19:30,
etc.
I12345678
MO
01:40
Q1234 STOP
............
MO 02:30
1.........STOP
SET CLOCK
SUMMER TIME
WINTER TIME
DAY : MO
TIME : 01:00
WINTER TIME
DAY : WE
TIME : 09 30
SET CLOCK
WINTER TIME