User manual

Publication 1760-UM001A-EN-P
Pico System Settings 6-7
Example: Modifying Switching Times for Outside Lighting
The outside lighting of a building is automatically switched on from 19:00 to
23:30 (7:00 pm to 11:30 pm) Mondays to Fridays in the Pico program.
The parameter set for the time switch function relay 1 is
saved in channel “A” and looks like this.
The outside lighting is now required to also turn on
between 19:00 and 22:00 on Saturdays.
1.
1.1.
1. Select PARAMETER from the main menu.
The first parameter set is displayed.
2.
2.2.
2. Use up or down arrows to scroll through the parameter sets until channel A of
time switch 1 is displayed.
3.
3.3.
3. Press the up arrow to select the next empty
parameter set, in this case channel B of time
switch 1.
The current time is 15:21.
4.
4.4.
4. Change the value for the day interval from MO to
SA:
• left and right arrows move between the
parameters
• up and down arrows change value.
5.
5.5.
5. Set the switching on time to 19:00.
6.
6.6.
6. Set the switching off time to 22:00.
7.
7.7.
7. Press Ok.
Pico saves the new parameters. The cursor remains
in the contact field on channel identifier “B”.
8.
8.8.
8. Press Esc to leave the parameter display.
The time switch will now also turn on at 19:00 on
Saturdays and switch off at 22:00.
MO-FR
15:20
19:00
23:30
A
+
ON
OFF
1
MO
15:21
--:--
--:--
B
+
ON
OFF
1
SA
15:21
--:--
--:--
B
+
ON
OFF
1
SA
15:21
19:00
--:--
B
+
ON
OFF
1
SA
15:21
19:00
22:00
B
+
ON
OFF
1
SA
15:21
19:00
22:00
B
+
ON
OFF
1