Specifications

Publication 1760-SG001F-EN-P - May 2006
Pico and Pico GFX-70 Programmable Controllers 19
Point-to-Point Serial Interface Cables
The serial interface cables are available in two lengths.
Cables for Pico-Link between Processors
The 1760-LDFC and 1760-LDFCA processors have two Pico-Link
terminals. Up to 8 of these processors can be connected together. The
first and last stations in the network must be provided with a 124 Ω
termination resistor.
The 1760-LDFC and 1760-LDFCA processors have two RJ45 sockets.
Socket 1 in the first station is for the termination resistor. For
subsequent stations, socket 1 is used for plugging in the incoming
cable. Socket 2 is used for the outgoing cable or for the termination
resistor on the last physical station on the network.
The cables are available in several lengths, including a long,
non-terminated version that you can cut to fit your needs.
Protective Covers
For special applications such as in the food industry, the display and
keypad must be protected against dust and liquids. For example, the
protective membrane, 1760-NDM, has been designed specifically for
this purpose.
Table 8 Serial Cable Selection
Cat. No. Description
1760-CBL-2M Point-to-point serial interface cable, 2 m (6.6 ft)
1760-CBL-5M Point-to-point serial interface cable, 5 m (16.4 ft)
Table 9 Pico-Link Cable Selection
Cat. No. Description
1760-CBL-INT01 Pico-link cable, 0.3 m (1 ft)
1760-CBL-INT03 Pico-link cable 0.8 m (2.6 ft)
1760-CBL-INT05 Pico-link cable 1.5 m (5 ft)
1760-CBL-INT300 Pico-link cable, non-terminated, 100 m (300 ft)
1760-CONN-RJ45 Connectors for Pico-Link cable
1760-TERM1 Network termination resistor