Specifications

Publication 1760-SG001F-EN-P - May 2006
Pico and Pico GFX-70 Programmable Controllers 17
Display Units
There are 2 display versions.
GFX Accessories
The following table shows a summary of the accessories for Pico GFX
controllers. Detailed descriptions for each item follow.
Table 5 Pico GFX I/O Modules Selection
Cat. No. Input Voltage
Category
Number of Inputs
(Digital)
Number of
Outputs
Analog
Capability
1760-IA12XOW4I 120V ac 12 4 (relay) none
1760-IB12XOW4IF 24V dc
12
(1)
(1)
Four of the digital dc inputs can alternately be used as 0...10V dc analog inputs. These inputs can be used as
either digital or analog, not both. For example, you could use 4 analog inputs plus 8 digital inputs.
4 (relay) input
1760-IB12XOW4IOF 24V dc
12
(1)
4 (relay) input and output
1760-IB12XOB4IF 24V dc
12
(1)
4 (transistor) input
1760-IB12XOB4IOF 24V dc
12
(1)
4 (transistor) input and output
Table 6 Display Unit Selection
Cat. No Description
1760-DUB Display unit with keypad
1760-DU Display unit without keypad
TIP
All controllers can be mounted on a panel.
Graphics display units cannot be mounted on a DIN
rail. The Pico GFX-70 processor and other
components can be mounted on a DIN rail.
Table 7 Pico GFX-70 Selection
Cat. No. Description
1760-CBL-PCO2 Programming cable, PC to processor
1760-PICOSOFTPRO PicoSoft Pro programming software (see page 8)
1760-PICOPRO-PC02 PicoSoft Pro software and cable kit (includes 1760-PICOSOFTPRO and
1760-CBL-PC02)
1760-MM3 256 K memory module
1606-XLP30E Power supply
1760-CBL-2M Point-to-point serial interface cable, 2 m (6.6 ft)