Specifications

Publication 1760-SG001F-EN-P - May 2006
16 Pico and Pico GFX-70 Programmable Controllers
Input/Output Simulator
The DC Simulator, 1760-SIM, can be used to simulate Pico inputs and
outputs to test and troubleshoot programs. The simulator contains
input simulator board, output simulator board, and wall-mount power
supply.
The input simulator board contains 8 maintained push buttons
connected to the 8 inputs of Pico as well as 2 potentiometers
connected to Inputs 7 and 8. The push buttons simulate digital input
devices. The potentiometers can be used to simulate analog input
devices. The output board contains four LEDs that simulate output
devices.
Select Pico GFX-70
Controllers, I/O, and
Accessories
Processors
This section helps you select Pico GFX-70 Controllers, I/O, and
accessories. There are 4 processor versions.
If your system requires more than 36 I/O, you will need to have
multiple processors using the Pico-Link. You can connect up to 8
processors. To use the Pico-Link, select the 1760-LDFC or 1760-LDFCA
processor.
GFX I/O Modules
GFX I/O modules connect to the back of the GFX processor. Pico
Expansion I/O modules connect to side of controller, and can be used
with Pico or Pico GFX-70 controllers.
You can only add one GFX I/O module and one Pico expansion I/O
module to each controller. Pico expansion I/O is shown on page 14.
Esc
Ok
Del
Alt
I8I6I4I2
I7I5I3I1
Q1 Q2 Q3 Q4
Digital
Inputs
I7 and I8
Analog Inputs
1760-L12BWB
1760-L12BWB-NC
1760-L12BWB-ND
Output LEDs
Connection
Cable
Power Supply Unit
Table 1 Pico GFX-70 Processor Selection
Processor Line Power Description
1760-LDF 24V dc Pico GFX-70 DC processor unit
1760-LDFA 120/240V ac Pico GFX-70 AC processor unit
1760-LDFC 24V dc Pico GFX-70 DC processor unit with Pico-Link
terminal
1760-LDFCA 120/240V ac Pico GFX-70 AC processor unit with Pico-Link
terminal