Specifications

Publication 1760-SG001F-EN-P - May 2006
Pico and Pico GFX-70 Programmable Controllers 15
Pico Accessories
This section provides information on various accessories.
Memory Modules
Each memory module can store a single Pico circuit diagram.
Information stored on the memory module is non-volatile. The
memory module can be used to make a backup copy of a program
and/or transfer it to another Pico controller.
Each memory module stores:
• the circuit diagram.
• all parameter settings of the circuit diagram.
• system settings.
Table 3 Pico Expansion I/O Module Selection
Cat. No. Input Voltage Category Number of Inputs
(Digital)
Number of Outputs
1760-IA12XOW6I 120 / 240V ac 12 6 (isolated relay)
1760-IB12XOB8 24V dc
12
(1)
(1)
Four of the digital dc inputs can alternately be used as 0...10V dc analog inputs. These inputs can be used as
either digital or analog, not both. For example, you could use 4 analog inputs plus 8 digital inputs.
8 (transistor)
1760-IB12XOW6I 24V dc
12
(1)
6 (isolated relay
1760-OW2 n/a 0 2 (relay)
Table 4 Pico Memory Module Selection
Cat. No. Description
1760-MM1 Pico 8 K memory module for 12-point controllers
1760-MM2 Pico 16 K memory module for 18-point controllers
1760-MM2B Pico 32 K memory module
IMPORTANT
The 1760-MM2B 32k memory module will not
operate with Series A controllers. In addition,
1760-MM1 and 1760-MM2 memory modules are
READ ONLY when used with the Series B
controllers.
1760-MM1 for all 1760-L12xxx