Specifications
Publication 1760-SG001F-EN-P - May 2006
12 Pico and Pico GFX-70 Programmable Controllers
Terminal Mode Using the Point-to-Point Serial Interface
This interface connection allows the reading of input/output states as
well as the reading and writing of marker ranges. This data can be
used for setpoint entry or for display functions. The stations have
different functions. The active station controls the point-to-point
connection. The remote station responds to the requests of the active
station.
Terminal Mode using the Pico-Link Topology
T
E
R
M
I
N
A
L
Active Station
Remote Station
R 1 - 12
S 1 - 8
GFX-70
GFX-70
GFX-70
GFX-70
GFX-70
Location 1
Station 1
Location 2
Station 2
Location 3
Station 3
Location 4
Station 4
Terminating
Resistor
Terminating
Resistor
First Station on the Pico-Link
Last Station on the Pico-Link
Terminal mode allows the
active station to control any
processor within the Pico-Link.
T
E
R
M
I
N
A