User manual

Publication 1760-UM001D-EN-P - September 2005
4-2 Draw a Circuit Diagram with Pico
Up/Down Arrows
• Change value.
• Move cursor up and down.
Left/Right Arrows
• Change between parameters.
• Move cursor left and right.
Cursor Button Set to P-Button Function (if enabled)
• Left Arrow = Input P1
• Right Arrow = Input P3
• Up Arrow = Input P2
• Down Arrow = Input P4
• Undo settings from previous Ok
• Exit current display
• Change or add a contact/relay.
• Save the setting.
Esc
Ok