User manual

Publication 1760-UM001D-EN-P - September 2005

3-4 Commission the Pico

Create a Circuit Diagram

(Program)

The following small circuit diagram example takes you step-by-step

through programming your first Pico circuit diagram. This example

demonstrates most of the basic programming rules.

As with conventional wiring, you use contacts and relays in the Pico

circuit diagram. With Pico, however, you no longer have to connect

components individually. With the push of a few buttons, the Pico

circuit diagram produces all the wiring. All you have to do is connect

any switches, sensors, lamps or contactors you wish to use.

In the following example, Pico carries out all the wiring and performs

the tasks of the circuit diagram shown above.

+24V dc 0V dc

CR1

+24V

com