User manual

Publication 1760-UM001D-EN-P - September 2005

5-2 Save and Load Circuit Diagrams

Memory Module

The following memory modules are available as Pico accessories.

Programs, including all relevant data, can be transferred from the

1760-MM2B memory module to the Series B Pico Controllers. The

existing 1760-MM1 and 1760-MM2 memory modules are Read-Only

when used with Series B Pico Controllers. The 1760-MM2B memory

module will not work with Series A Pico Controllers.

Each 1760-MM2B memory module can hold one Pico program, up to

32K.

Information stored on the memory module is ’non-volatile’. Because

the information is not lost when the power is turned off, you can use

the module to make a backup copy of your program and/or to

transfer it to another Pico device.

The following information is saved to the memory module:

• the program

• all parameter settings of the program

• all text displays

• system settings

– debounce (input delay)

– P-buttons

– password

– retention on/off

Insert the memory module into the open interface slot.

Pico Controller Memory Module

1760-L12xxx 1760-MM1 (Series A only)

1760-L18xxx 1760-MM2 (Series A only)

Series B Pico Controllers 1760-MM2B