Specifications

Publication 1760-GR001A-EN-P
3-2 Pico Interface Socket
Loading or Storing the Circuit Diagram
You can only transfer the program from Pico to the memory module or vice versa
in the STOP mode.
DEVICE ->CARD: Transfer circuit diagram and parameter
settings from Pico to the memory module.
CARD->DEVICE: Transfer circuit diagram and parameter
settings from the memory module to Pico.
DELETE CARD: Delete the contents of the memory module.
Available Memory Modules
Use the 1760-MM1 memory module for the 12-I/O Pico controllers and use the
1760-MM2 memory module for the 1760-L18AWA Pico controller. The
1760-L18AWA controller is able to read from the 1760-MM1 memory module,
but cannot write to it. The 1760-MM2 memory module will not physically fit on a
12-I/O Pico controller.
PicoSoft
PicoSoft is an optional PC program that creates, stores, and manages Pico circuit
diagrams. It transfers the circuit diagrams from the PC to Pico or vice versa using a
special PC interface cable.
The PicoSoft software also includes extensive on-line Help.
To use the on-line Help, start PicoSoft and choose Contents in the Help menu.
Context sensitive help is also available. Choose a menu item with the mouse and
press F1 while keeping the mouse button pressed.
ATTENTION

The PC interface cable is catalog number 1760-CBL-PM02 and
is available as an accessory item. Only use the Pico interface
cable. Do not attempt to make your own cable as this can cause
damage to the unit or present a shock hazard.
DEVICE - CARD
CARD - DEVICE
DELETE CARD