Specifications

1 Publication 1760-GR001A-EN-P
Chapter 3
Pico Interface Socket
The Pico interface socket, which is beneath a protective cap, accepts the optional
Pico memory module, or connects Pico to a PC using the optional PC interface
cable and the PicoSoft software. This allows you to copy the circuit diagrams to
and from the PC and/or memory module.
Memory Module
Memory modules are available as an optional accessory. Each memory module can
store a single Pico circuit diagram. Information stored on the memory module is
non-volatile (the information is not lost when the power is turned off). The
memory module can be used to make a backup copy of a program and/or to
transfer it to another Pico controller.
Each memory module stores:
• the circuit diagram
• all parameter settings of the circuit diagram
• system settings
ATTENTION

ELECTRICAL SHOCK HAZARD
The memory module and PC-cable socket are at the potential of
L2. There is a danger of electric shock if L2 is not grounded. Do
not make contact with electrical components under the socket
cover.
1760-MM1 for all 1760-L12xxx
controllers
1760-MM2 for the 1760-L18AWA
controller