Specifications

Publication 1760-GR001A-EN-P
2-16 Drawing a Circuit with Pico
Text Display (1760-L18AWA Only)
The Text Display is used to display eight freely definable messages on the Pico
screen. Each text block displays up to 48 characters from the Pico display character
set (ASCII + Pico special characters). If the Text Display is enabled, the text entered
via PicoSoft is displayed. If several Text Displays are enabled, the next screen is
displayed every 4 seconds. When Text Display D1 is enabled it stays displayed
(fault indication).
Press Ok to switch to the menus at any time.
Current values or parameters of function relays can be displayed in lines 2 and 3.
Examples:
CAUTION!
PUMP 1
MOTOR
MALFUNCTION
THE TIME
IS
14:42
TIME RELAY 1
SETP99.00 S
QUANTITY
ACTV 0042
PCS
SETP0100
ACTV 42.00 S
Fault Signals Time with Text Display
Display Current Value and
Parameter of Timing Relay
Display Counter Value