Specifications

Publication 1760-GR001A-EN-P
Pico Controller 1-7
18-Point Status Display
Menu Display
Cursor Display
1...5..8....
RE
IP
MO 02:00 ST
.2..5..8 RUN
Inputs
Retention Enabled
Day, Time
Outputs
Debounce Enabled/P-Buttons Enabled
Start-up Mode
Mode
Inputs 1, 5, 8 ON
Outputs 2, 5, 8 ON
PROGRAM...
RUN...
PARAMETER
SET CLOCK..
RUN...
PARAMETER
SET CLOCK..
PASSWORD..
Current choice
blinks in the Pico
menu
Main menu with and without password enabled
WINTER TIME
DAY : MO
TIME :
01 25
WINTER TIME
DAY :
MO
TIME : 01:25
There are two different cursor types:
Full block navigation is shown as a flashing block:
• Move cursor with the left/right arrows
• When in circuit diagram, also use up/down
arrows
Parameter change cursor flashes the selected
parameter:
• Change position with left/right arrows
• Change values with up/down arrows
Flashing values/menus are highlighted in grey in
this manual.