User Manual

Rockwell Automation Publication 20B-IN025B-EN-P - January 2011 51
Component Replacement Procedures Chapter 3
Capacitor Bank Fan
See Chapter 1 - Drive Components to locate the component detailed in these
instructions.
Remove Components
1. Read and follow the Safety Precautions on page 8 and Important Initial
Steps on page 10.
2. Perform Remove Main Control Panel on page 22
.
3. Perform Remove Stacking Panel on page 25
.
4. Locate the Capacitor Bank Fan.
5. Label and disconnect all wires for the fan.
6. Remove the top and bottom mounting screws.
7. Remove the fan assembly and dispose of it
properly.
Install Components
1. Install the new fan assembly. Hand tighten the
two mounting screws.
2. Reconnect wires.
3. Torque the two mounting screws to 2.9 N•m (26 lb•in).
4. Reassemble remaining components in reverse order.
5. Replace all safety shields and enclosure covers before applying power to the
drive.
Top Fan Mounting Screw
Bottom Mounting Screw is
directly behind this screw