User Manual

Rockwell Automation Publication 20B-IN025B-EN-P - January 2011 27
Basic Component Removal Procedures Chapter 2
9. Remove the six nuts for mounting the Stacking Panel.
10. Remove Stacking Panel; carefully set aside.
Install Components
1. When instructed for the component you are replacing, reinstall the
Stacking Panel components in the reverse order of removal.
2. Torque mounting screws to 5.6 N•m (50 lb•in).
3. Replace all safety shields and enclosure covers before applying power to the
drive.
Mounting Nuts (6)
Shown with Main Control Panel and Blower Control Panel Removed