Manual

MV SMC Flex OEM Components

Voltage Sensing Board

Instruction Sheet

Handling Carefully unpack the item and inspect it for damage that may have

occurred during shipping. Immediately report any damage to the

claims office of the carrier. Rockwell Automation will render

reasonable assistance in resolving a damage claim.

Voltage Sensing Board

Identification

Verify the catalog number of the voltage sensing board.

Table 1 – Voltage Sensing Board Catalog Number

Line Voltage (3 phase, 50/60 Hz) Catalog Number

800 to 1500 V 1503E-VSZ1

1501 to 2500 V 1503E-VSA

2501 to 4800 V 1503E-VSE

4801 to 7200 V 1503E-VSK

Storage If the voltage sensing board will not be installed immediately after

receipt, store it in a clean, dry and dust-free environment. Humidity

should not exceed 95%, non-condensing.

PAGE 1
MV SMC Flex OEM Components Voltage Sensing Board Instruction Sheet Handling Carefully unpack the item and inspect it for damage that may have occurred during shipping. Immediately report any damage to the claims office of the carrier. Rockwell Automation will render reasonable assistance in resolving a damage claim. Voltage Sensing Board Identification Verify the catalog number of the voltage sensing board.
PAGE 2
Voltage Sensing Board – Instruction Sheet Installation ATTENTION Resistors are fragile and are susceptible to damage from improper handling. As a result, resistors should be tested after installation. Failure to verify proper functioning of the resistors before commissioning the SMC may result in injury to personnel or damage to equipment. The Voltage Sensing Board is pre-installed on MV SMC Flex OEM frames (items 1503E-FRxx).