Manual

MV SMC Flex OEM Components
Gate Driver Test Power Supply
Instruction Sheet
Handling Carefully unpack the item and inspect it for damage that may have
occurred during shipping. Immediately report any damage to the
claims office of the carrier. Rockwell Automation will render
reasonable assistance in resolving a damage claim.
Identification
Verify the catalog number of the gate driver test power supply.
Table 1 – Gate Driver Test Supply Identification and Catalog Numbers
Description Voltage Catalog Number
North American
(shown above)
120V AC – 50/60 Hz
9V DC, 1A
1503E-PSD
Universal
(with NEMA power cord)
120/220V AC – 50/60 Hz
12V DC, 1A
1503E-PSU
Storage Store the gate driver test power supply in a clean, dry and dust-free
environment. Humidity should not exceed 95%, non-condensing.
Installation Refer to MV SMC Flex Motor Controller – Bulletins 1503E, 1560E,
and 1562E, User Manual (Publication 1560E-UM051A-EN-P) for
complete instructions on the use of the Gate Driver Test Power
Supply.
Additional Publications Order additional copies of instruction manuals for all Allen-Bradley
medium voltage products from DOX Literature Fulfillment at
www.rockwellautomationdox.com.
Gate Driver Test
Power Supply
Gate Driver Test
Power Supply