User guide

200 Rockwell Automation Publication 1560E-UM051F-EN-P - June 2013
Appendix G Spare Parts
Table 36 - Common Parts
Table 37 - Accessories
Quantity Description Part Number
1 per SCR pair
(1)
(1) Refer to Table 3 3 for an explanation of the number of SCRs per controller, which is voltage dependant.
Sharing resistor 32.5 kΩ, 225W, two 2.5 kΩ taps 80025-753-01-R
1 per SCR
(1)
Current loop self-powered gate driver board (CLGD) 80190-519-01-R
1 per controller Voltage Sensing Board (VSB) 1500 V 81020-326-51-R
2500 V 81020-326-52-R
4800 V 81020-326-54-R
7200 V 81020-326-55-R
1 per controller Interface Board 80190-440-03-R
(1 per SCR) + 3
(1)
Fiber Optic Cable 2.5 m 80025-549-03-R
5.0 m 80025-549-01-R
1 per controller Test Power Supply 120 VAC for North America 80187-051-51-R
Universal 80187-245-51-R
1 per controller Current loop transformer, 50VA 115/230 : 0.6V 80022-133-01
3 per controller
(2)
(2) Different lengths are used for the various configurations. The current loop total length must equal 21 ft. for proper operation.
Current loop cable assembly 5 ft. 80018-246-55
6 ft. 80018-246-51
7 ft. 80018-246-52
8 ft. 80018-246-53
9 ft. 80018-246-54
1 per controller Current loop sense CT 80022-163-01
1 per controller Ribbon cable from VSB to Interface Board 80026-146-56
2 per controller Ribbon cable from Control Module to Interface Board (6-pin) 80174-201-01
3 per controller Ribbon cable from Control Module to Interface Board (8-pin) 80174-201-02
Qty per
controller
Description Part Number
1 Control Module (Standard) 41391-454-01-S1FX
Control Module (Pump Control) 41391-454-01-B1FX
1 Fan (120 V)
(1)
(1) Optional equipment.
80025-248-01-R
Fan (240 V)
(1)
80025-248-02
1 Frequency to voltage converter for Tachometer
feedback
(1)
2 Hz – 10 kHz 80026-427-01
0 – 100 kHz 80026-427-02
1 Power Supply for frequency to voltage converter
(1)
80026-433-01
Fuse Extractor 80144-491-02