Configuration and Diagnostic Software Tool User Manual Owner manual
Table Of Contents
- Content
- 1. Introduction
- 2. Installation
- 3. Optical Interface
- 4. Configuration Tool for GuardShield Safe 2/Safe 4 Light Curtains
- 5. Configuration Tool for MSR42
- 5.1. Introduction
- 5.2. Starting MSR42 Configuration Tool
- 5.3. The menu bar
- 5.4. Main window
- 5.4.1. Tab “Design”
- 5.4.2. Tab “Diagnosis”
- 5.4.3. Tab “Application info”
- 5.4.4. Possible Configurations
- 5.4.5. Micro 400 Light Curtain
- 5.4.6. One Device (2 NC)
- 5.4.7. One or Two Device (OSSDs)
- 5.4.8. Safety override
- 5.4.9. Muting Micro 400
- 5.4.10. Muting other device (OSSDs)
- 5.4.11. Function “EDM” + “Start Release”
- 5.4.12. Function “Stop delay”
- 5.5. Download, Verify & Upload
- 5.6. Muting
- 5.6.1. General
- 5.6.2. Muting lamp
- 5.6.3. Muting sensors
- 5.6.4. Mute dependant override function
- 5.6.5. Sensor output delay function
- 5.6.6. Muting with enable signal
- 5.6.7. Muting disable function
- 5.6.8. Safety light curtain interruption monitoring function
- 5.6.9. 43BMuting time recorder
- 5.6.10. 44BSetup: 2 sensor T-type
- 5.6.11. Setup: four sensor T-type
- 5.6.12. Setup: two sensor L-type
- 5.6.13. Setup: two sensor T-type with enable signal
- 5.7. Blanking
- 6. Appendix

32
Light Curtain Multi-Function Control Module User Manual
Original instructions
1. Attach the Optical Interface to the MSR42 control module.
2. Disconnect the power supply to the MSR42 module.
3. Connect the Optical Interface to your PC.
4. Select menu item “File” – “PC -> MSR42 (Download).”
5. Enter the password and press “OK”-button (Figure 44
).
(to change the password see chapter 5.3.2.2 on page 16
)
Figure 44: Enter user password
Using the unit protection key, see chapter 5.5.3 on page 35
.
7. The “Controller Description” window opens (Figure 45
) and requests the MSR42 device no. and a “designation.” The device no. can be found
on the label of the control unit (Figure 46
). Enter this information and press “OK” button.
Figure 45: Input of device no. and designation