Manual

Shaft Seal Kits 3
Rockwell Automation Publication 2090-IN012C-EN-P - February 2014
Shaft Seal Installation Clearances
Motor Cat. No. Shaft Seal Installation Clearance
Min, mm (in.) Nom, mm (in.) Max, mm (in.)
VPL-A/Bxxx Press the shaft seal so that the seal is flush or below the front surface of the motor.
VPF-A/Bxxx
1.40 (0.055) 1.50 (0.060) 1.65 (0.065)
VPS-Bxxx
MPL-A/B15xx
1.50 (0.060) 2.00 (0.080) 3.00 (0.120)
MPL-A/B2xx
All other MPL-A/Bxxx Press the shaft seal so that the seal is flush or below the front surface of the motor.
MPF-A/Bxxx
1.40 (0.055) 1.50 (0.060) 1.65 (0.065)
MPS-A/Bxxx
MPM-xxxx Press the shaft seal so that the seal is flush or below the front surface of the motor.
MDF-SBxxx 1.40 (0.055) 1.50 (0.060) 1.65 (0.065)
TL-Series Press the shaft seal so that the seal is flush or below the front surface of the motor.
Front Surface
of Motor
Shaft Seal Pressed
Flush with Front
Surface of Motor
Shaft Seal Pressed
Below Front
Surface of Motor
Front Surface
of Motor
Nom
Nom
Min
Max