Instruction Manual

14 MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size
Rockwell Automation Publication MP-IN001H-EN-P - January 2014
Product Dimensions This section provides dimensions for the motors. Dimensions for Bayonet Connectors (catalog number MPL-xxxxx-xx2xxx)
L
P
GE
LA
LB
T
L-LB
LE
AD
HD
N
F
D
S (diameter of bolt circle) M (diameter of holes)
Shaft End Hole Thread and Depth
(Pilot Diameter)
Feedback and Power Connectors
(1)
(left to right)
67.8 (2.67)
Feedback, Power, and Brake Connectors
(1)
(left to right)
88.9 (3.5)
Shaft Key MPL-x3xx = 5 x 5 x 25
MPL-x4xx = 6 x 6 x 25
MPL-x45xx = 8 x 7 x 32
MPL-x520, x540, x560 = 8 x 7 x 40
MPL-x580 = 10 x 8 x 59
MPL-xxxxx-xx2xxx Connector
Add for High Resolution End Cap 3.3 (0.13)
(1) Electronic zero (index pulse or Stegmann ABS = 0) occurs when the shaft key or dimple (not shown) is aligned with the connectors (as shown).