Installation Instructions Owner's manual
Publication MP-IN010B-EN-P January 2011 PN-91159
Supersedes Publication MP-IN010A-EN-P — December 2006 Copyright © 2011 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
Allen-Bradley, Kinetix, MP-Series, Rockwell Automation, and Rockwell Software are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400
MPL-980 Motor Fan Kit Assembly and Dimensions
Additional Resources
Refer to the MP-Series Low Inertia Servo Motor with 215 mm or Larger Frame Size Installation
Instructions, publication MP-IN002, and the Kinetix Motion Control Selection Guide,
publication GMC-SG001
, for additional information.
AIRFLOW
Internal View of
Power Terminal
Area
Replace Eyebolt
with Hex-head
Cap Screw
230V Fan
Power
Terminals
Ground
Terminal
Extend Mounting
Strap for a Brake
Motor
Fan Shroud
Limits Connector
Rotation to 180º
Increments
Mounting
Strap
MPL-900-FAN-X245 kit is shown with a MPL-B980E-MJ72AA motor that has an M58 power connector.
Front Cross
Brace
367.5 mm
(14.47 in.)
298.4 mm
(11.75 in.)
291.6 mm
(11.48 in.)
Motor Extension
MPL-B980E-MJx2AA (non-brake) 92.7 mm (3.65 in.)
MPL-B980E-MJx4AA (brake) 216.6 mm (8.53 in.)
Power Connector Rise
- M40 - 61.0 mm (2.4 in.)
- M58 - 120.7 mm (4.75 in.)