Owner's manual
Table Of Contents
- MP-IN003C-EN-P — April 2003
- Front Cover
- Catalog Numbers
- Table of Contents
- Receiving and Storage
- Environmental Ratings
- Motor Catalog Number Identification
- Before You Install the Motor
- Installing Your Motor
- Connector Data
- Mounting Dimensions
- Housing and Output Flange Connections
- Motor Load Force Ratings
- Holding Brake
- Cables and Connector Kits
- Gear Lubricant
- Related Documentation
- Back Cover
- Web Links
2 MP-Series Integrated Gear Motor Installation Instructions
Publication MP-IN003C-EN-P — April 2003
Receiving and Storage
The customer is responsible for inspecting the equipment before
accepting the shipment from the freight company. Check the item(s) you
receive against your purchase order. Notify the carrier of any shipping
damage or missing items immediately.
You may store your motor in a clean and dry location within the following
environmental conditions:
Environmental Ratings
The International Protection Code or IP Rating for environmental
protection of MP gear motors is:
Operational temperature range for MP gear motors is:
Vibration ratings for the MP gear motors are:
• storage temperature: -30° to 70° C (-22° to 158° F)
• relative humidity: 5% to 95% non-condensing
• atmosphere: non-corrosive
• IP64 dust tight, splashing water
• operating temperature: 0° to 40° C (32° to 104° F)
• storage (shock): 20 g peak max, 6 msec duration
• operating (vibration): 2.5 g peak max, 30 to 2000 Hz