Owner's manual
Table Of Contents
- MP-IN003C-EN-P — April 2003
- Front Cover
- Catalog Numbers
- Table of Contents
- Receiving and Storage
- Environmental Ratings
- Motor Catalog Number Identification
- Before You Install the Motor
- Installing Your Motor
- Connector Data
- Mounting Dimensions
- Housing and Output Flange Connections
- Motor Load Force Ratings
- Holding Brake
- Cables and Connector Kits
- Gear Lubricant
- Related Documentation
- Back Cover
- Web Links
10 MP-Series Integrated Gear Motor Installation Instructions
Publication MP-IN003C-EN-P — April 2003
Mounting Dimensions
Dimensions for MP-Series Integrated Gear Motors are provided on the
listed pages. Refer to Figure 1 on page 11 for the dimensional symbol
designations for the motors.
If your motor is one of the following, then go to: Page
MPG-A004-031x22, MPG-A004-031x24 12
MPG-A004-091x22, MPG-A004-091x24 13
MPG-x010-031x22, MPG-x010-031x24 14
MPG-x010-091x22, MPG-x010-091x24 15
MPG-x025-031x22, MPG-x025-031x24 16
MPG-x025-091x22, MPG-x025-091x24 17
MPG-x050-031x22, MPG-x050-031x24 18
MPG-x050-091x22, MPG-x050-091x24 19
MPG-x110-031x22, MPG-x110-031x24 20
MPG-x110-091x22, MPG-x110-091x24 21