User guide

Rockwell Automation Publication MP-UM001D-EN-P - September 2013 81
Dimensions Appendix A
Figure 21 - MP-Series Linear Stages (MPAS-A/B9xxxx-ALMx2C)s
25.4
(1.0)
339
(13.35)
130.8
(5.15)
104.1
(4.10)
265.7
(10.46)
116.4
(4.58)
Ø 5.8 (0.23) Thru
Ø 9.7 (0.38) Thru
14.2 (0.56)
120
(4.72)
30.0
(1.18)
105.4
(4.15)
(4X) M8 x 1.25-6H
(4X)
Ø 6.8 (0.27)
12.0 (0.47)
45.2 (1.78) Thru
264.7
(10.42)
208.6
(8.21)
28.0
(1.10)
281
(11.06)
338.14
(13.31)
46.8
(1.84)
8.5
(0.33)
38.3
(1.51)
172.2
(6.78)
249
(9.8)
5.6
(0.22)
25.4
(1.0)
Dimensions are in mm (in.)
Detail A
120 (4.72)
Toe Clamp/T- Nut Spacing
Bracket ±51 (2.0)
from center of travel.
See Detail A
25.4 (1.0)
Mechanical Overtravel
Ground Screw
M5 x 0.8-6H
T- Nut
Mount to base by using M6 x 1.0 hardware
(optional accessory).
6.5 (0.26)
Depth, max
(OAL) Overall Length
Toe Clamp is standard for
covered stages. Mount to base
by using M6 x 1.0 socket cap
screw.
0.025 / 300 x 300 (0.001 / 12.0 x 12.0)
Flatness requirement for the surface
that this stage is being mounted to.
25.4 (1.0)
Mechanical Overtravel
(CE) Cable Extensions
From End of Cable Carrier
(2X) Ø 5.5 (0.22) Through
Pilot Hole
Travel
(4X) 9/16-12 UNC Through (2 per end cap)
Access point for lubricating linear bearings.
Provision to use lifting hooks (not provided).
Cat. No.
MPAS-
OAL CE
Cat. No.
MPAS-
OAL CE
Cat. No.
MPAS-
OAL CE
mm (in.) mm (in.) mm (in.) mm (in.) mm (in.) mm (in.)
A/B9014x-ALMx2C 581 (22.9) 1243 (49.0) A/B9044x-ALMx2C 881 (34.7) 1093 (43.0) A/B9104x-ALMx2C 1481 (58.3) 1793 (71.0)
A/B9020x-ALMx2C 641 (25.2) 1218 (48.0) A/B9056x-ALMx2C 1001 (39.4) 1018 (40.0) A/B9128x-ALMx2C 1721 (67.8) 1668 (66.0)
A/B9026x-ALMx2C 701 (27.6) 1168 (46.0) A/B9068x-ALMx2C 1121 (44.1) 968 (38.0) A/B9152x-ALMx2C 1961 (77.2) 1543 (61.0)
A/B9032x-ALMx2C 761 (30.0) 1143 (45.0) A/B9080x-ALMx2C 1241 (48.9) 918 (36.0) A/B9176x-ALMx2C 2201 (86.7) 1418 (56.0)
A/B9038x-ALMx2C 821 (32.3) 1118 (44.0) A/B9092x-ALMx2C 1361 (53.6) 843 (33.0) A/B9194x-ALMx2C 2381 (93.7) 1343 (53.0)