User Manual

26 MP-Series Electric Cylinders
Rockwell Automation Publication MPAR-IN001D-EN-P - September 2012
MPAR-x1400E-xxx 476 (16.8) 20.5 (0.81)
MPAR-x2100C-xxx 399 (14.1) 31.7 (1.25)
MPAR-x2200C-xxx 488 (17.2) 28.6 (1.12)
MPAR-x2300C-xxx 577 (20.4) 26.3 (1.03)
MPAR-x2400C-xxx 666 (23.5) 24.5 (0.96)
MPAR-x2600C-xxx 844 (29.8) 21.8 (0.86)
MPAR-x2100F-xxx 469 (16.5) 29.2 (1.15)
MPAR-x2200F-xxx 558 (19.7) 26.8 (1.05)
MPAR-x2300F-xxx 647 (22.82) 24.9 (0.98)
MPAR-x2400F-xxx 736 (26.0) 23.3 (0.92)
MPAR-x2600F-xxx 914 (32.2) 20.9 (0.82)
MPAR-x3100E-xxx 938 (33.1) 29.2 (1.15)
MPAR-x3200E-xxx 1066 (37.6) 27.4 (1.08)
MPAR-x3300E-xxx 1194 (42.1) 25.9 (1.02)
MPAR-x3400E-xxx 1322 (46.6) 24.6 (0.97)
MPAR-x3600E-xxx 1578 (55.7) 22.5 (0.86)
MPAR-x3800E-xxx 1834 (64.7) 20.9 (0.82)
MPAR-x3100H-xxx 938 (33.1) 29.2 (1.149)
MPAR-x3200H-xxx 1066 (37.6) 27.4 (1.08)
MPAR-x3300H-xxx 1194 (42.1) 25.9 (1.02)
MPAR-
x3400H-xxx 1322 (46.6) 24.6 (0.97)
MPAR-x3600H-xxx 1578 (55.7) 22.5 (0.88)
MPAR-x3800H-xxx 1834 (64.7) 20.9 (0.82)
IMPORTANT
Absolute position is maintained while the motor feedback cable is connected to the drive. If the
cable is disconnected or if a motor fault is reported by the drive, the absolute home position
must be re-established.
Maximum Velocity for End-stop Impact with No Load (continued)
Cat. No.
Extended Mass
g (oz)
Impact Velocity, max
mm/s (in/s)