Manual

MP-Series Heavy Duty Electric Cylinders 5
Rockwell Automation Publication MPAI-IN001E-EN-P - March 2012
About the MP-Series Heavy Duty Electric Cylinders
MP-Series™ electric cylinders feature multi-turn high resolution encoders and are available with
24V DC brakes. The MP-Series motor drives a ball screw or roller screw that converts rotary
motion into linear movement. The linear motion extends or retracts the thrust rod within the
electric cylinder housing.
The MP-Series electric cylinders have been designed for exact positioning at high speeds.
IMPORTANT
The MP-A/Bxxxxxx2x electric cylinders are non-braking. When there is no input torque, the
thrust rod can be moved freely. To achieve self-locking of your motion system, use an electric
cylinder with an integrated brake (catalog number MPAI-A/Bxxxxxx4x).
Item Description
1 Feedback connector
2 Power connector
3 Motor with feedback device
4 Actuator cylinder
5 Threaded mounting holes on front, sides, rear, and bottom surfaces
(1)
(1) Trunnion mount electric cylinders, not shown, have threaded mounting holes only on the rear surface.
6 Wrench flats for counteracting torque on thrust rod when installing rod-end accessories
7 Grease fitting (not included on catalog number MPAI-x2xxxC)
8 Thrust rod
8
5
6
3
2
1
MP-Series Heavy Duty Electric Cylinder
(MPAI-A3150CM32A is shown)
4
7