User Manual

Rockwell Automation Publication CC-QS033A-EN-P - February 2014 25
Micro800 Controller PTO Axis Setup Chapter 1
2. From the Controller Change dialog box, type and use the pull-down menu to set the following attributes.
3. Click OK.
A new project named, PTO_M850_24QBB_r5, is created in your My Document > CCW folder and the output
dialog box reports that the controller change is successful.
Attribute Setting
Project Name PTO_M850_24QBB_r5
Controller Name Micro850
Controller type 2080-LC50-24QBB