Software Owner manual

82 Rockwell Automation Publication MOTION-UM004B-EN-P - October 2012
Chapter 2 Sizing Your System
2.1. Identify Your Load
A load is a device that transfers the actuator output to the desired end effectors.
Loads do not affect the motion type.
Figure 65 - Load Type Tab
Table 48 - Load Type Options
Load Type Description Page
Linear Loads Load moves in a straight line. 83
Rotary Loads Load rotates and the system has no translation to linear motion. 86
Rotary Complex Loads
Rotary motion can be translated to linear motion, and vise versa. Inertia,
friction, and/or torque values for the system change with time.
87
Application Template
Loads
Simplify data entry dramatically where the application is appropriate. The
Application Templates include Press Roll Feed (Constant Time or Angle),
Carriage Cut Off, Cutter Knife Drive, Advanced Templates, and Power Speed.
96
From SolidWorks
Used to obtain load data to aid in sizing your application for the appropriate
motors, drives, and accessories.
120