Software Owner manual

58 Rockwell Automation Publication MOTION-UM004B-EN-P - October 2012
Chapter 1 Welcome to Motion Analyzer Software
1.2.2.4.4.2.2. Shunt Tab
Select the shunt and capacitor module for your system.
Figure 45 - Shunt Tab
Table 38 - Shunt Tab Properties (refer to Figure 45
)
Parameters Description
Shunt selection
(refer to Figure 45
)
Click Search to configure external shunts if an existing internal shunt for a given
drive is outside its rating. If you need more than one external shunt, click search
to select multiple shunt modules. You can also select a compatible shunt
manually.
Continuous Current utilization bar
(refer to Figure 45
)
The drive continuous and peak current utilizations and the shunt continuous
current utilization histograms are displayed in percentage form. Click the drive
module or shunt catalog number to view its product specification.