Software Owner manual

Rockwell Automation Publication MOTION-UM004B-EN-P - October 2012 43
Welcome to Motion Analyzer Software Chapter 1
1.2.2.4.2.3. Cable Length Tab
Click the Cable Length tab to select cables for connecting IPIM module-to-IDM
unit and IDM unit-to-IDM unit.
Figure 28 - Cable Length Tab
Table 24 - Cable Length Tab Descriptions
Options Description
IDM Cables
(label 1 in Figure 28
From the Cable Length pull-down menus, choose the appropriate cable length for connecting
IPIM module-to-IDM unit and IDM unit-to-unit. The maximum cable lengths in an IDM system
are specified as 25 m (82 ft) IDM unit-to-IDM unit and 100 m (328 ft) total cable length.
Cable For Specifies the modules the cables will join.
Cable Length Specifies the cable length.
Total Length Specifies the total length of the cables.
IDM System Graphic
(label 2 in Figure 28
)
Graphical representation of IPIM module, associated IDM units and joining cables. Cable length
is displayed over the cables.