Software Owner manual

Rockwell Automation Publication MOTION-UM004B-EN-P - October 2012 23

Welcome to Motion Analyzer Software Chapter 1

There are two areas of interest in the Group view, as illustrated in Figure 14.

Figure 14 - Group View Example

Table 9 - Power Rail View Options

Options Description Page

Power Rail Image

(label 1 in Figure 14)

Power rail image based on the current system configuration. This graphic only

applies to multi-axis drive families.

Axis Summary Image

(label 2 in Figure 14)

Displays a summary of the current axis configurations including drive module

and motor/actuator catalog numbers.